|
This
heat exchanger is designed & manufactured to reduce / cool
the compressed air temperature to desired level, so the
condensation takes place & vaporized moisture & oil in air gets
converted in liquid droplets which is further separated by moisture
separator. The after cooler substantially reduces the moisture &
oil load coming on down stream at the initial stage. The cooling
media can be water or air. |
 |
| Types |
Location |
| Shell and tube (Vertical /
Horizontal) with and without moisture separator. |
At the outlet of Compressor. |
| Range |
MOC |
| Upto 5000 CFM at 10 Kg/cm2
operating pressure. |
Shell – As per IS 1239 / IS
2062 |
| |
Tube – As per BS 2871 part
III C – 105,
TEMA std. |
| |
Demister - SS 304 / SS 316
|
MODELS
COMPRESSED AIR WATER COOLED AFTER COOLER
| S/N |
MODEL |
FLOW RATE |
| 01 |
MGSAC – 50 |
50 CFM |
| 02 |
MGSAC – 100 |
100 CFM |
| 03 |
MGSAC – 150 |
150 CFM |
| 04 |
MGSAC – 200 |
200 CFM |
| 05 |
MGSAC – 300 |
300 CFM |
| 06 |
MGSAC – 500 |
500 CFM |
| 07 |
MGSAC – 700 |
700 CFM |
| 08 |
MGSAC – 1000 |
1000 CFM |
Note*--
High pressure/range can be offered on request.
»
|
|
