Project Engineering & Services
Gas Generators Units
Purification Systems (For all gases)
Compressed Air Systems
Air Drying Units
Fabricated Equipments
Gas Distribution Systems
FRP Cooling Tower
Process Filters & Separators-Air, Gas & Liquid
MGS Auto Drain Valve (Electronic Timer Based)
Instrumentation-Accessories
Instrumentation-Spares
Feedback

Process Filters & Separators-Air, Gas & Liquid

» request a quote

Simplex Filters/Strainers

These filters are provided with single basket, so they are called as simplex filters. These are used where flow can be interrupted for cleaning of basket. These filters are used before Pumps, Flow Meters, Turbines, and Temperature & Measuring Instruments etc.

Duplex Filter/Strainer

These filters/strainers are provided with dual baskets, so they are  called as Duplex Filters/Strainers. These are used where flow can not be interrupted for cleaning of baskets. These filters are supplied with inlet & outlet connection on same side or diametrically Opp. Side.

These are also called Twin Strainers.

The advantages of these filters is that basket/filter element can be cleaned during operation also one filter element removes in using while the other can be cleaned.
 

Self Cleaning Filters

These filters are used where large volume of fluid to be handled & continuous removal of debris is required. There filters facilities reduced differential pressure in the equipments. and the quick cleaning of the basket. These filters work on edge filtration principle. Filtration down to 25 micron can be achieved in these filters. Cleaning is done by simply turning the handle without opening the cover.

Y-Strainers

Construction of there strainers is synonymous with it's name. These are used where debris needs to be removed frequently. Because of short flange to flange distance, it takes less space in pipe line and  hence pressure drop is reduced. These are available in variety of material like C.I/C.S./S.S. & fabricated construction to meet the requirement of customer.

These filters are available in screwed as well as flanged end connections.

Conical Strainers

These are also called temporary strainers, used in the pipe line for flushing of the system. These are suitable for liquid, steams, Compressed Air, Chemicals etc. They can be mounted between the flanges.

 

Suction Filter

Suitable for installation in the storage tanks below liquid level on pump's suction inlet pipe. These are available in various size and combinations.
 

 


 

 

COALESCING FILTER

The Fine Filter combinations are designed & manufactured to filter out dust particles, moisture & oil from compressed air. The fine filter combination works in stage wise filtration. It serves with least pressure drop over long period with excellent filtration level i. e. upto 0.01 µ & 0.005 ppm oil residual with highest efficiency of 99.9999 % & are used in industry to various application where quality of air is recommended as per various pneurope recommendation or IS 8573:1.
Housing are manufactured & tested to operate at 16 bar (max) working pressure at max 60°C temp. Filter with higher temp. also can be supplied if required. End Conn. Supplied upto model 007 is BSP female. End conn. Supplied model 009 V onward are of flanges ASA-150# or as per purchasers choice. All models are supplied with manual drain. Auto drain is optional at.
Types Comp. Air Flow :
Pre Filter (PF) : Coarse Filter From 18 SCFM to 1860 SCFM as nominal flow.  
Fine Filter (FF) : Micro Filter  
AC Filter (ACF) : Oil Filter  

 
Function MOC
To filter compressed air upto following level. Housing : Aluminum, SS 316, Carbon Steel
  Dust - Up to 0.01 µ
  Oil - Upto 0.005 ppm
  Moisture - Upto liquid & aerosol form.
  Efficiency - 99.9999 %
Element :
  Media
  PF - Sintered Bronze : SS
  FF - Borosilicate micro glass fiber.
  ACF - Fine Activated Carbon granule.

 
Op. Pressure Op. Temp.
Standard at 16 bar. 60°C max.

 

Note*-- High pressure/range can be offered on request.

» request more details

© MAS GASAIR SYSTEMS

Developed by KITINFINET